HP HPE7-A01試験対策 & HPE7-A01試験勉強過去問

P.S. JPTestKingがGoogle Driveで共有している無料かつ新しいHPE7-A01ダンプ：https://drive.google.com/open?id=1sUy82A0W-ZDHgvdxMjOUZ_ovcGUaL3fW

あなたのキャリアでいくつかの輝かしい業績を行うことを望まないのですか。きっとそれを望んでいるでしょう。では、常に自分自身をアップグレードする必要があります。では、IT業種で仕事しているあなたはどうやって自分のレベルを高めるべきですか。実は、HPE7-A01認定試験を受験して認証資格を取るのは一つの良い方法です。HPの認定試験のHPE7-A01資格は非常に大切なものですから、HPの試験を受ける人もますます多くなっています。

HP HPE7-A01認定試験は、Aruba Wireless Networking Solutionsを専門とするIT専門家向けに設計されています。この認定は、キャンパス環境でのArubaワイヤレスネットワークの設計、実装、および管理の知識とスキルを検証したい個人に最適です。この試験は、ワイヤレスネットワーキングのキャリアを求めている、または現在の仕事のためにスキルを向上させたい個人を対象としています。

Aruba Certified Campus Access Professionals になることで、IT プロフェッショナルは、Aruba 製品とソリューションを使用して安全なワイヤレスネットワークを設計および展開する能力を証明し、信頼性を高めることができます。この認定は、キャリアアップの機会や収益の増加につながることもあります。さらに、認定されたプロフェッショナルは、Aruba のオンラインコミュニティにアクセスできるため、ネットワーキング、知識共有、プロフェッショナルの成長の機会を提供しています。

>> HP HPE7-A01試験対策 <<

HPE7-A01試験の準備方法｜権威のあるHPE7-A01試験対策試験｜検証するAruba Certified Campus Access Professional Exam試験勉強過去問

ほとんどの専門家は、HPE7-A01のパフォーマンスが際立っていると感じた後、生地を追加するのが最適だと考えています。 HPE7-A01ガイド資料は、学習効率を大幅に改善できる学習システムを提供します。 HPE7-A01学習教材を使用する過程で、指定された時間内に試験バンクに集中します。実際の試験時間を参照してHPE7-A01練習時間を設定し、実際のHPE7-A01試験環境と自信を構築します。

HP HPE7-A01試験は、Arubaネットワークの設計、展開、および管理に専門知識を持つITプロフェッショナル向けの認定試験です。この試験は、ネットワークエンジニアリングまたはネットワーク管理の分野で働くプロフェッショナルで、認定されたArubaエキスパートになりたいと思っている人を対象としています。

HP Aruba Certified Campus Access Professional Exam 認定 HPE7-A01 試験問題 (Q76-Q81):

質問 # 76
What is the best practice for handling voice traffic with dynamic segmentation on AOS-CX switches?

A. Central authentication and port-based tunneling of the voice traffic.
B. Controller authentication and port-based tunneling of all traffic
C. Switch authentication and local forwarding of the voice traffic
D. Switch authentication and user-based tunneling of the voice traffic.

正解：C

解説：
This is the best practice for handling voice traffic with dynamic segmentation on AOS-CX switches. Dynamic segmentation is a feature that allows AOS-CX switches to tunnel user traffic to a controller or another switch based on user roles and policies. For voice traffic, it is recommended to use switch authentication and local forwarding, which means the voice devices are authenticated by the switch and their traffic is forwarded locally without tunneling. This reduces latency and jitter for voice traffic and improves voice quality. The other options are incorrect because they either use central authentication or tunneling, which are not optimal for voice traffic. Reference: https://www.arubanetworks.com/techdocs/AOS-CX/10.04/HTML/5200-6728/bk01-ch05.html https://www.arubanetworks.com/assets/ds/DS_AOS-CX.pdf

質問 # 77
With the Aruba CX switch configuration, what is the Active Gateway feature that is used for and is unique to VSX configuration?

A. VRID is set automatically as SVI vlan id
B. VRRP and Active gateway are mutually exclusive on a VLAN
C. VRIDs need to be non-overlapping with VRRP
D. VRRP and Active Gateway can be configured on a single VLAN for interoperability

正解：B

解説：
Active gateway is a first hop redundancy protocol that eliminates a single point of failure. The active gateway feature is used to increase the availability of the default gateway servicing hosts on the same subnet. An active gateway improves the reliability and performance of the host network by enabling a virtual router to act as the default gateway for that network. If you have enabled active gateway, VRRP is not required. Active gateway is similar to VRRP in that routed traffic from the VSX node is sourced from the switch interface MAC and not the virtual MAC address (VMAC). Each active gateway sends a periodic broadcast hello packet to avoid VMAC aging on the access switches. The switch views the active gateway IP as a self IP address.
Active gateway is preferable over VRRP because with VRRP traffic is still pushed over the ISL link, resulting in latency in the network.

質問 # 78
Your Aruba CX 6300 VSF stack has OSPF adjacency over SVI 10 with LAG 1 to a neighboring device The following configuration was created on the switch:

正解：D

解説：
Explanation
OSPF (Open Shortest Path First) is a routing protocol that uses link-state information to calculate the best path to each destination in the network. OSPF establishes adjacencies with neighboring routers to exchange routing information and maintain a consistent view of the network topology1.
To establish an OSPF adjacency, the routers need to have some common parameters, such as the area ID, the network type, the hello interval, the dead interval, and the authentication method2. The routers also need to have a matching subnet mask on the interface that connects them3.
In this case, the Aruba CX 6300 VSF stack has an SVI (Switched Virtual Interface) on VLAN 10 with an IP address of 10.1.1.1/24 and a LAG (Link Aggregation Group) on port 1/1/1 and port 2/1/1 that connects to a neighboring device. The SVI is configured with OSPF area 0 and network type broadcast. The LAG is configured with OSPF passive mode, which means that it will not send or receive OSPF hello packets.
The neighboring device has an interface with an IP address of 10.1.1.2/24 and a LAG on port 1/0/1 and port
2/0/1 that connects to the Aruba CX 6300 VSF stack. The interface is configured with OSPF area 0 and network type broadcast.
Since the Aruba CX 6300 VSF stack and the neighboring device have the same area ID, network type, subnet mask, and default hello and dead intervals on their interfaces, they will be able to establish an OSPF adjacency over SVI 10 with LAG 1. The OSPF passive mode on the LAG will not affect the adjacency, because it only applies to the LAG interface, not the SVI interface.

質問 # 79
Match the topics of an AOS10 Tunneled mode setup between an AP and a Gateway. (Options may be used more than once or not at all.)

正解：

解説：

質問 # 80
What is enabled by LLDP-MED? (Select two.)

A. GVRP VLAN information can be used to dynamically add VLANs to a trunk
B. APs can request power as needed from PoE-enabled switch ports
C. iSCSl client devices can set the required MTU setting for the port.
D. Voice VLANs can be automatically configured for VoIP phones
E. iSCSl client devices can request to have flow control enabled

正解：B、D

解説：
These are two benefits enabled by LLDP-MED (Link Layer Discovery Protocol - Media Endpoint Discovery). LLDP-MED is an extension of LLDP that provides additional capabilities for network devices such as VoIP phones and APs. One of the capabilities is to automatically configure voice VLANs for VoIP phones, which allows them to be placed in a separate VLAN from data devices and receive QoS and security policies. Another capability is to request power as needed from PoE-enabled switch ports, which allows APs to adjust their power consumption and performance based on the available power budget. The other options are incorrect because they are either not enabled by LLDP-MED or not related to LLDP-MED. Reference: https://www.arubanetworks.com/techdocs/ArubaOS_86_Web_Help/Content/arubaos-solutions/wlan-qos/lldp-med.htm https://www.arubanetworks.com/techdocs/ArubaOS_86_Web_Help/Content/arubaos-solutions/wlan-rf/poe.htm

質問 # 81
......

HPE7-A01試験勉強過去問: https://www.jptestking.com/HPE7-A01-exam.html

P.S.JPTestKingがGoogle Driveで共有している無料の2025 HP HPE7-A01ダンプ：https://drive.google.com/open?id=1sUy82A0W-ZDHgvdxMjOUZ_ovcGUaL3fW